Vibesware GR-1 Manual de usuario descargar pdf (Pagina 11)

4.5 Feedback of multiple strings

Up to three strings can be agitated at the same time. This can be used for

feedback with power chords. It is normal here, that the feedback of one string

dominates. This is similar to amplifier feedback but with the difference that the

dominating string can be forced by the Resonators head position. This can be

done by moving the Resonator from the lower to the upper strings or the other

way round. By this the dominating string can be changed while playing.

4.6 Limits of playing, pickup selection and power setting

The Resonator has been designed for positioning in the neck area. Near the

activated pick-up undesired direct feedback from the Resonator to the selected

pickup may occur. The minimum distance depends on the Resonator volume

(70% is a good starting point). Begin playing with the bridge pickup. Normally, the

overall neck area can be used with it. The sensitivity not only depends on the

Resonator power but also on the pickup. In general humbuckers show less

sensitivity than single coils. With some practice you play closer by the strings

which enables you to reduce the Resonator power. Then, you can also play with

the neck/middle pickup. You should aim to work it out, because the feedbacks you

can achieve are truly rich and amazing !

1 2 ... 6 7 8 9 10 11 12

Sin comentarios

Vibesware GR-1 Manual de usuario Pagina 11